Output Destination Setting Examples - Roland V-Drums TD-30 Owner's Manual

Overall Settings for the TD-30 (SETUP)
Output Destination Setting
Examples
Here are some examples of output destination settings.
MEMO
The MASTER OUT jacks and the DIRECT OUT 1–8 jacks
are unbalanced.
Default settings
As the chart below illustrates, the PHONES jack and the
MASTER OUT jacks will output all sounds. Individual
sounds are assigned to DIRECT OUT 1-8 jacks for
individual sound control with a PA system.
Jack Output
PHONES All
MASTER OUT
All
DIRECT OUT 1 KICK
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE, EDGE
DIRECT OUT
TOM 1–4 (Stereo)
5/6
DIRECT OUT CRASH 1, 2,
7/8 AUX 1–4 (Stereo)
Sending the same audio for monitoring
and PA
With these settings, the same sound will be output from
the PHONES jack, the MASTER OUT jacks, and the DIRECT
OUT 7/8 jacks.
The sound being monitored by the performer will be the
same as the sound sent to the PA system.
Jack Output
PHONES All
MASTER OUT All
DIRECT OUT 1 −
DIRECT OUT 2 −
DIRECT OUT 3 −
DIRECT OUT 4 −
DIRECT OUT
−
5/6
DIRECT OUT
All
7/8
116
Example destination
Monitor headphones
Drum monitor
PA (external mixer)
Example destination
Monitor headphones
Drum monitor
−
−
−
−
−
PA (external mixer)
Sending Ambience and/or MFX
separately
This chart shows how you can use the MASTER OUT jacks
to output the Ambience and/or MFX (multi-effects).
This allows the PA engineer to balance the effects with
the individual sounds.
Jack Output
PHONES
All
MASTER OUT Ambience only
DIRECT OUT 1 KICK
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE, EDGE
DIRECT OUT
TOM 1–4 (Stereo)
5/6
DIRECT OUT CRASH 1, 2,
7/8
AUX 1–4 (Stereo)
Example destination
Monitor headphones,
drum monitor
PA (external mixer)