Controlling The Sounds Using A Connected Pedal; (Pedal Control); Controlling From An External Midi Device (Kit Midi); Setting The Note Number For Each Pad (Note Number) - Roland TAIKO-1 Reference Manual

Controlling the Sounds Using a Connected Pedal

(Pedal Control)

1 .
On the KIT EDIT screen, select
then press "SELECT"
(F2 button)
The PEDAL CONTROL screen appears.
2 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
Parameter Value
[ H ] [ I ] buttons
[+] [-] buttons
Pad PAD1H–PAD2R
Pitch Ctrl Range -24–24
Decay Ctrl Sw OFF, ON
Level Ctrl Sw OFF, ON
To set whether the connected pedal controls the pitch, decay or
level, configure the settings in
Shortcut Settings (Control Settings)"
3 .
Press the F1 button several times to return to the top
screen .
"Pedal Control" and
.
Explanation
Selects the pad to set.
Sets the amount that the pitch changes
according to how far down you press the
connected pedal.
Set this to "ON" to control the decay with
the connected pedal, and "OFF" if you don't
want to control the decay with the pedal.
Set this to "ON" to control the level with
the connected pedal, and "OFF" if you don't
want to control the level with the pedal.
"Configuring the Pedal Jacks and
(p. 36).
Editing Sounds and Other Settings for Kits (Kit Edit)
Controlling from an External MIDI Device
1 .
On the KIT EDIT screen, select
press "SELECT"
(F2 button)
The KIT MIDI screen appears.
The KIT MIDI screen contains the following settings.

Setting the Note Number for Each Pad (Note Number)

Setting the MIDI Channel for Each Pad (Channel)
Setting the Gate Time for Each Pad (Gate Time)
2 .
Use the [H] [I] buttons to select the item, and then
press "SELECT"
(F2 button)
Setting the Note Number for Each Pad
This shows how to set the note numbers for each pad.
1 .
On the KIT MIDI screen, select
then press "SELECT"
(F2 button)
The KIT MIDI NOTE NUMBER screen appears.
2 .
Use the [H] [I] buttons to select the item, and then
use the [+] [-] buttons to change the setting .
Parameter Value
[ H ] [ I ] buttons
[+] [-] buttons
PAD1H
PAD1R
0 (C-)–
127 (G9), OFF
PAD2H
PAD2R
3 .
Press the F1 button several times to return to the top
screen .
(Kit MIDI)
"Kit MIDI" and then
.
.
(Note Number)
"Note Number" and
.
Explanation
0 (C-)–127 (G9): Sets the MIDI note number
transmitted and received by each pad.
OFF:
Note messages are not transmitted
or received.
page 21
page 22
page 22
21