Section 6: Operations; General; Power Switch - Grizzly G0547 Instruction Manual

SECTION 6: OPERATIONS

General

This section covers basic sanding operations.
Please read the remaining portion of the manual
before attempting any type of operation.
Your safety is important! Please follow the
warnings below during this entire section:
Damage to your eyes, lungs, and ears
could result from failure to wear safety
glasses, a respirator, and hearing protec-
tion while sanding with this machine.
Operating this equipment has the potential
to propel debris into the air which can
cause eye injury. Always wear safety glass-
es or goggles when operating equipment.
Everyday glasses or reading glasses only
have impact resistant lenses, they are not
safety glasses. Be certain the safety glass-
es you wear meet the appropriate stan-
dards of the American National Standards
Institute (ANSI).
-18-
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.

Power Switch

The Model G0547 Combo Sander is equipped
with a paddle-type power switch with a safety
key.
Make sure the power switch is in the OFF
position before connecting the sander to the
power source. Serious personal injury could
occur if you connect your machine to the
power source with the power switch on.
To operate the power switch:
1. Plug in the sander and insert the safety lock-
ing key shown in Figure 16.
Figure 16. Inserting the safety key.
2. Lift the switch to start and press the switch
down to stop the motor.
3. Remove the locking key when the machine is
not in use and store the key in a safe place.
G0547 Combo Sander