Section 7: Maintenance; Maintenance Safety; Schedule - Grizzly G0547 Instruction Manual

SECTION 7: MAINTENANCE

Maintenance Safety

Your safety is important! Please follow the
warnings below during this entire section:
Serious personal injury
!
could occur if you con-
nect your machine to the
power source during the
maintenance
DO NOT connect the
machine to the power
source while performing
any maintenance on this
machine.
-22-
process.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles from
machine could cause
serious eye injury.
Wear safety glasses at
all times.
Check for the following conditions before
each use:
• Loose table bolts.
• Worn or damaged sanding discs or
belts.
• Worn or damaged wires.
• Any other condition that could hamper
the safe operation of this machine.
Perform the following tasks at the scheduled
time intervals:
After Each Use
• Wipe off the sawdust build-up from the
table surface.
• Turn off power switch and remove the
switch key.
Weekly
• Wipe a lubricant such as SLIPIT
the table.
Long-Term Storage
the
• Keep unpainted surfaces rust free
with products such as Boeshield

Schedule

G0547 Combo Sander
®
onto
® T-9.