Table of Contents
Advertisement
Programming
Several functions of this readout are user programmable.
describes what features and functions are available and how to change the
factory defaults to customize the system to suit your application needs.
To enter programming mode:
Press and hold the
firmware version (
readout will enter programming mode.
followed by the programmed value for Pr1. Release the
now in programming mode.
Once you are in the Programming mode, momentarily pressing the
will advance through the Programming Parameter list, first displaying the
Programming Parameter number, Pr x, then the currently programmed value
for that parameter.
Momentarily press the
Momentarily press the
Momentarily press
To exit programming mode:
Press and hold the
NOTE: The readout will automatically exit programming mode after 60
seconds of no key activity.
Accurate Technology DigiScale Models 18 & 28 User Manual
key. After approximately 7 seconds the readout
DATUM
b 1.xxx
) will be displayed for 2-3 seconds and then the
Press & Hold for 9 seconds
+
key to increase the parameter value setting.
-
key to decrease the parameter value setting.
to reset the parameter to the factory default value.
DATUM
key for 3 seconds.
DATUM
PR
1
is displayed, immediately
DATUM
The following
key. You are
/
key
IN
MM
Page 33 of 36
Advertisement
Table of Contents
