Table of Contents
Advertisement
E
RROR CODES
no Enc
What does
If the Encoder is off the Scale, or the Encoder cable is unplugged from
the readout,
4.
Be sure the encoder is on the scale.
5.
Connect the encoder to the readout.
6.
Unplug the encoder from the readout for 5 seconds and then
reconnect.
What does b FAIL
b FAIL mean?
b FAIL
b FAIL
When the readout displays this message it means the battery voltage has
dropped to a level where reliable operation is no longer possible. Install
new batteries to clear this message.
What does P FAIL
P FAIL mean?
P FAIL
P FAIL
When the readout displays this message it means the battery voltage has
dropped to a level where reliable programming is not possible. Install
new batteries to clear this message.
Accurate Technology DigiScale Models 18 & 28 User Manual
mean?
no Enc
will appear on the display. To clear the error:
Page 35 of 36
Advertisement
Table of Contents
