Table of Contents
Advertisement
S
4
ECTION
This Section includes information for:
Digital Readout, LCD, Compact
With Firmware Version b 2.xxx & higher
(Press the
DATUM
Mounting
Surface Mount Configuration
The Compact readout may be mounted:
Using Velcro or Double sided tape
Punch out any of the four holes from the inside of the back case.
Using any of the four holes on the back of the case. NOTE: Use a #4 or
M3 screw
not longer than 3/8 " (9mm).
Manual Part # 800-1404-001, Rev B
key for 7 seconds to display Readout Firmware version)
C
OMPACT
Part Number:
R
EADOUT
700-1600-710
Page 24 of 36
Advertisement
Table of Contents
