S
3
ECTION
This Section includes information for:
Digital Readout, LCD, DIGI
With Firmware Version d 2.xxx & higher
(Firmware version is displayed on power-up)
Mounting
The Readout may be mounted:
Using Velcro or Double sided tape
Drilling out the 3 holes from the inside of the case
Using any of the six holes on the back of the case which may tapped for
M2 or 4-40 screws.
Manual Part # 800-1404-001, Rev B
D
Part Number:
R
IGI
EADOUT
700-1600-D55
Page 14 of 36