Life Fitness x3 Assembly & Operation Manual page 43

Step 6 Assemble Moving Arms to Pedal Arms; Pedal / Moving Arm
Joint Pivot Covers
Parts: Hardware Bag #4
Tools: 17mm Socket Wrench, Phillips Screwdriver
Lift the front end of the user left pedal lever (Q) to meet the left
rocker arm clevis (R). Secure the pedal lever to the rocker arm
clevis using one M10 X 74mm Hex Head Bolt (S) and one M10
Hex Nut (T). Tighten the bolt and nut securely. Repeat the proce-
dure for the right pedal lever and rocker arm clevis.
Attach the left side lower pivot covers (U) over the moving arm/pedal
arm pivot point. Snap the cover together over the moving arm/pedal arm pivot
point and use two M5 X 8mm Black Phillips Screws (V) to attach. Repeat for right side.
Note: Left and right covers are identical.
14
(2, M10 X 74mm Black Hex Head Bolts)
(2, M10 Hex Nuts)
(4, M5 X 8mm Black Phillips Screws)
U
T
U
R
Y
Y
Q
S