Page of 8

Life Fitness X9I Assembling Instructions

X series cross-trainers.
Hide thumbs
   

Advertisement

X9i Cross-Trainer
A S S E M B L Y I N S T R U C T I O N S

Advertisement

   Also See for Life Fitness X9I

   Related Manuals for Life Fitness X9I

   Summary of Contents for Life Fitness X9I

  • Page 1

    X9i Cross-Trainer A S S E M B L Y I N S T R U C T I O N S...

  • Page 2

    Congratulations... Life Fitness and welcome to the world of Life Fitness X9i and the Cross-Trainers The following Parts List and the step by step assembly procedures have been assembled to make the set-up of the Cross-Trainer as quick and easy as possible.

  • Page 3

    DO NOT locate the Cross-Trainer outdoors, near swimming pools, or in areas of high humidity. DO NOT operate your Cross-Trainer if it has been dropped, damaged, or even partially immersed in water. If this occurs, contact Life Fitness Customer Support Services at the number in the Operation Manual.

  • Page 4

    OOLS EQUIRED SSEMBLY Key Wrenches, 1/2" Open End Wrench Hex socket Head Cap Screw 3/8-16 x 1” 0017-00101-1645 Phillips Pan Head Screw #8-18 x 3/4” 0017-00101-1242 Front Monocolumn Cover 0K61-06350-0003 Console Support Assembly AK61-00500-0015 Left Front Cover 0K61-06200-0004 Left User Arm Assembly AK61-00178-0002 Front Rocker Cover 0K61-06340-0003...

  • Page 5

    Before proceeding, familiarize yourself with the parts of the Cross-Trainer and make sure that you have received all the items described in the Parts List. Step 2 Locate the left and right FRONT COVER (#9, #10). Usign two PHILLIPS PAN HEAD SCREWS (#3), mount the USER LEFT FRONT COVER (#9) to the FRAME (A).

  • Page 6

    Step 4 Detach and unwrap the WIRE HARNESS (E) (10P, 3P, 4P) located at the top of the MONOCOLMN (F). Holding the CONSOLE SUPPORT ASSEMBLY (#7) with the handgrips facing upward, feed the WIRE HARNESS up through the neck and out the top access hole. Carefully lower the CONSOLE SUPPORT ASSEMBLY into the MONOCOLUMN.

  • Page 7

    Locate the POLAR RECEIVER (#16). Slide the FOAM ISOLATOR (#15) over the POLAR RECEIVER. Remove the POLAR RECEIVER JACK (G) from the tape and plug the POLAR RECEIVER into the POLAR RECEIVER JACK. Step 11 Locate the front and back MONOCOLUMN COVERS (#5 &...

  • Page 8

    Manual. If your Cross-Trainer does not respond as described in the Operation Manual, contact the nearest Life Fitness service center as listed in the Operation Manual. Copyright 2002 Brunswick Corporation. All rights reserved. Life Fitness is a trademark of Brunswick Corporation. Polar is a registered trademark of Polar Electro, Inc.

Comments to this Manuals

Symbols: 0
Latest comments:
  • Matc Apr 13, 2013 11:00:
    this is an unbelievab​le hassle. what is going on, here?