Tools Needed:
17mm Socket Wrench, Phillips Screwdriver, Rubber Mallet
Step 1
Packaging
Parts: None
Remove all packaging and place main components to the side of the box. Break box down in each of the four
corners.
Step 2
Assemble the Stabilizer
Parts: Hardware Bag #1
Tools: 17mm Socket Wrench
Assemble the stabilizer tube (foot) (A) to the bottom base brackets (B) of
the product using two M10 X 15mm Silver Hex Head Bolts (C).
(2, M10 X 15mm Silver Hex Head Bolts)
C
B
A
11