Status; Diagnostics - NetComm FIBRE NF1ADV User Manual

WiFi Data and VoIP Gateway
NF1ADV

Status

The Status menu has the following submenus:


Diagnostics

 WAN
System Log

Statistics

Route

ARP

DHCP

Diagnostics
The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test
displays a fail status:
1. Click on the Help link and follow the troubleshooting procedures in the Help screen that appears.
2. Now click Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the error
3. If the test continues to fail, contact Technical Support.
FIELD
ENET Connection
Test your Wireless Connection
Test the Assigned IP Address
Ping Primary Domain Name Server
YML27
www.netcommlimited.com
Figure 84: Status – Diagnostics
Pass: Indicates the Ethernet connection to your computer is connected to the LAN port of the router.
Fail: Indicates that the router does not detect the Ethernet interface of your computer.
Pass: Indicates that the wireless card is switched ON.
Fail: Indicates that the wireless card is switched OFF.
Pass: Indicates that the modem has received a valid IP address from the PPP server.
Fail: Indicates that the modem has not received a valid IP address from the PPP server.
Pass: Indicates that the router can communicate with the DNS server.
Fail: Indicates that the router was unable to communicate with the primary Domain Name Server (DNS).
This may not have an effect on your internet connection. Therefore if this test fails but you are still able
to connect to the internet there is no need to troubleshoot this issue.
DESCRIPTION
NF1ADV User Guide
58