Quality Of Service - NetComm FIBRE NF1ADV User Manual

WiFi Data and VoIP Gateway
NF1ADV

Quality of Service

Quality of Service offers a defined level of performance in a data communications system - for example the ability to guarantee that
video traffic is given priority over other network traffic to ensure that video streaming is not disrupted by other network requirements.
This means that should you be streaming video and someone else in the house starts downloading a large file, the download won't
disrupt the flow of video data.
To enable QoS select the Enable QoS checkbox, and set the Default DSCP (Differentiated Services Code Point) Mark. Then press
the Apply/Save button.
Queue Setup
Click the Add button to add a QoS Queue. The following screen will be displayed.
The above screen allows you to configure a QoS queue entry and assign it to a specific network interface. Each of the queues can
be configured for a specific precedence. The queue entry configured here will be used by the classifier to place ingress packets
appropriately.
NOTE: Precedence level 1 relates to higher priority while precedence level 3 relates to lower priority.
YML27
www.netcommlimited.com
Figure 59: Advanced - Enable QoS
Figure 60: Advanced - QoS Queue Setup
Figure 61: Advanced - QoS - Add QoS Queue
NF1ADV User Guide
48