Check Voip Registration Status - NetComm V431 Quick Start Manual

Note: if you use representative account to register all FXS ports, you need make sure the SIP server that the V431 registers on supports
multiple concurrent active calls using the SIP representative account. Check this with your VoIP service provider.
Note: the V431 supports SIP proxy mode and Peer-to-Peer call (direct IP) at the same time. That means even when the V431 registers
on a SIP server, the user can still use the V431 to make Peer-to-Peer calls. The Peer-to-Peer calls are defined in "Local Phone Book"
configuration section. Fig 3-3 is an example of phone book setting.

3.2 Check VoIP registration status

SIP registration status can be check at Status > Current Status. In Fig 3-4 example, the FXS1, FXS2 and FXS3
registered successfully, but FXO1 failed to register.
V431 VoIP Gateway Quick Start Guide
10
Fig 3-3: example of local phone book setting
YML859 Rev1
www.netcomm.com.au