Wireless Bridge; Station Info - NetComm FIBRE NF1ADV User Manual

WiFi Data and VoIP Gateway
NF1ADV

Wireless Bridge

The following screen appears when selecting Wireless Bridge, and gives a detailed explanation of how to configure wireless bridge
features for the wireless LAN interface.
Click the Apply/Save button to implement new configuration settings.
FIELD
AP Mode
Bridge Restrict

Station Info

The following screen appears when you select Station Info, and shows authenticated wireless stations and their status.
Click the Refresh button to update the list of stations in the WLAN.
FIELD
MAC
Associated
Authorized
SSID
Interface
YML27
www.netcommlimited.com
Figure 21: Wireless - Wireless Bridge
Selecting Wireless Bridge (Wireless Distribution System) disables Access Point (AP) functionality while
selecting Access Point enables AP functionality. In Access Point mode, wireless bridge functionality will
still be available and wireless stations will be able to associate to the AP.
Selecting Disabled in Bridge Restrict disables the Wireless Bridge restriction, which means that any
wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) turns the wireless bridge
restriction on. Only those bridges selected in Remote Bridges will be granted access. Click Refresh to
update the station list when Bridge Restrict is enabled.
Table 10: Wireless - Wireless Bridge
Figure 22: Wireless - Station Info
The MAC address of any connected wireless client.
Lists all the stations that are associated with the Access Point, along with the amount of time since
packets were transferred to and from each station. If a station is idle for too long, it is removed from this
list.
Lists those devices with authorized access.
The SSID(Service Set Identifier) of your wireless network.
The wireless interface being used to connect to the network.
Table 11: Wireless - Station Info Settings
DESCRIPTION
DESCRIPTION
NF1ADV User Guide
24