Routing - NetComm FIBRE NF1ADV User Manual

WiFi Data and VoIP Gateway
NF1ADV

Routing

The Default Gateway, Static Route, Policy Routing and Dynamic Route settings can be found in the Routing option of the Advanced
menu.
Default Gateway
Select your preferred WAN interface from the available options.
Static Route
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
To add a static route rule click the Add button. The following screen will be displayed.
Enter the Destination Network Address, Subnet Mask, Gateway IP Address and/or WAN Interface. Then click Apply/Save to add
the entry to the routing table.
YML27
www.netcommlimited.com
Figure 64: Advanced - Routing - Default Gateway
Figure 65: Advanced - Routing - Static Route
Figure 66: Advanced - Routing - Add Static Route
NF1ADV User Guide
50