Tr-069 Client; Sntp - NetComm FIBRE NF1ADV User Manual

TR-069 Client

TR-069 enables provisioning, auto-configuration or diagnostics to be automatically performed on your router if supported by your
Internet Service Provider (ISP).
FIELD
Inform
Inform interval
ACS URL
ACS User Name
ACS Password
WAN Interface used by TR-069
Client

SNTP

This interface allows you to configure the time settings of the NF1ADV.
FIELD
First NTP Time Server
Second NTP Time Server
Time Zone Offset
NOTE: SNTP must be activated to use Parental Control.
NF1ADV User Guide
33
Figure 32: Management - TR-069
Set to enable to activate TR-069 client settings.
Time in seconds that data is sent to the Auto-Configuration Server (ACS).
The address where the ACS server is located.
The user name to access the ACS server.
The password to access the ACS server.
The connection used to send and receive data to the ACS server.
Figure 33: Management – SNTP
Select the required internet time server.
Select a second time server if required.
Set the local time zone.
Table 17: Management – SNTP
DESCRIPTION
DESCRIPTION
YML38
www.netcommlimited.com