NetComm NF1Adv Setup Manual
  1. Manuals
  2. Brands
  3. NetComm Manuals
  4. Gateway
  5. FIBRE NF1ADV
  6. Setup manual
NetComm NF1Adv Setup Manual

NetComm NF1Adv Setup Manual

Voip
Hide thumbs Also See for NF1Adv:
1
2
3
4
5
6
7

Advertisement

Table of Contents

See also: User Manual , Setup Manual
NF1Adv VOIP Setup Guide
(for Dodo)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NF1Adv and is the answer not in the manual?

Questions and answers

Related Manuals for NetComm NF1Adv

Summary of Contents for NetComm NF1Adv

  • Page 1 NF1Adv VOIP Setup Guide (for Dodo)
  • Page 2 Configuring your NF1Adv for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network Settings: You will need to connect your computer directly to your VOIP device (modem, or ATA) and set the network connection on your computer to obtain an IP address automatically.
  • Page 3 Below are the instructions for setting Windows 7 to obtain an IP address automatically for your ethernet connection: 1. Click on the Start Menu, and go to “Control Panel”. 2. Click on “Network and Sharing Centre”. (If you only see "Network and Internet", open that first, and then click on "Network and Sharing Centre") 3.
  • Page 4 Step 2: Configuring your VOIP settings: Troubleshooting Tip One sided VOIP calls may be an indication of a missing or misconfigured port forwarding rule. 1. Navigate to http://192.168.1.1 in a web browser, using “admin” as both the username and password. 2.
  • Page 5 3. Enter the following details as given to you by your VoIP Service Provider. Use pppoe if you’re using the NF1Adv as a modem/router; use WAN if you’re using it just as a router Enable SIP Proxy, Outbound Proxy and Registrar Use voip.dodo.com.au and port 5060 or as...
  • Page 6 SIP Configuration Locale Selection Choose your country from the dropdown list SIP domain name Keep blank or as directed by Dodo Use SIP Proxy Ensure that this is ticked SIP Proxy voip.dodo.com.au or as directed by Dodo SIP Proxy Port 5060 or as directed by Dodo Use SIP Outbound Proxy Ensure that this is ticked...
  • Page 7 6. The VoIP connection registration status should all change to Up if all the settings entered are correct and you have a current connection to the internet. 7. Check for a dial tone on your phone handset. The VoIP account should now be active and you should now be able to make and/or receive VoIP phone calls (depending on the type of VoIP account you are using).

Table of Contents