xDSL
The following graphic shows the ADSL Network Statistics screen. The Reset button (located at the bottom of the screen) can be
used to reset statistics. The bit error rate can be tested by clicking the ADSL BER Test button.
Figure 91: Status - xDSL
Route
Select Route to display the paths the Router has found.
Figure 92: Status - Route
ARP
Click ARP to display the ARP information.
This option can be used to determine which IP address / MAC address is assigned to a particular host. This can be useful when
setting up URL filtering, Time of Day filtering or Static DHCP addressing.
Figure 93: Status –ARP
NF1ADV User Guide
YML38
www.netcommlimited.com
63