Status - NetComm NTC-8000-01 User Manual

Status

The status page provides system related information and is displayed when you login to the NTC-8000-01 management console.
By default, the status page will show System Information, Ethernet Port Status, WWAN Status, IPsec Status and the 3G service
connection details.
ITEM
System Uptime
Router Version
Router Serial Number
Phone Module
MAC Address
Mobile Broadband (MBB)
WLAN
Connection Up Time
Provider
Coverage
IMEI
Frequency
Signal Strength (dBm)
SIM Status
Ethernet Port Status
UM-00006 v1.1
www.netcommwireless.com
Figure 5 - The Status Page
The current uptime of the gateway.
The firmware version running on the gateway.
The serial number of the gateway.
The type of phone module, the firmware version of the module and the current module temperature.
The MAC Address is a unique 12 digit hexidecimal network identifier assigned to the NTC-8000-01.
The current connection profile, Interface, status, APN, local and remote addresses of the WWAN connection.
The current wireless network clients or wireless access points that are connected with the NTC-8000-01.
The time in hours, minutes and seconds that the current mobile broadband connection has been active.
The current mobile broadband service provider detected and in use with the on-board SIM card..
The type of mobile broadband connection available for use.
The IMEI (International Mobile Equipment Identity) that identifies the NTC-8000-01 on the mobile broadband
network.
The frequency band currently in use.
The strength of the 3G signal detected
The status of the SIM currently inserted into the gateway.
The current speed and status of the Ethernet port.
Table 10 - Status page items
DEFINITION
NTC-8000 – M2M Multi-Port Network Gateway
13