Wireless (Only Applicable For The Nb5580W) - NetComm NB5580 User Manual

Adsl integrated gateway
Hide thumbs Also See for NB5580:
Table of Contents

Advertisement

4-10 Wireless (only applicable for the NB5580W)

This setting page allows you to configure advanced wireless functions of your
NB5580W. To set those items needs more technology background. Unless you really
understand those technical terms, it would be better to leave them as default setting.
Wireless Station Status The "Active MAC Table" shows the MAC addresses of
wireless clients, which have the same ESSID and WEP key with Broadband Wireless
Router. When the "MAC Filter" function is disabled, the background color is gray.
Click the "Active MAC Table" button will display all MAC addresses of wireless
nodes on your WLAN.
If the MAC Filter function is enabled and the MAC addresses showing in this table
have been entered into the "Edit MAC Filter" table, the background color of those
MAC addresses will be green. Otherwise, it should be red. If the MAC addresses
have been blocked (check the Filter field beside the MAC address in Edit MAC
Filter table), the background color will be yellow.
Wireless Station MAC Filter This function allows you to restrict wireless users to
access Internet.
Click "Edit MAC Filter Setting" button to open the edit table.
Wireless MAC Entry There are 32 sets divided into four groups in this function.
You can choose each group by selecting from the pop-down list. Enter the MAC
addresses of the computers you wish to block in the columns and click the Filter
field beside the MAC address, and then that user will be blocked to link to WLAN
and Internet. If the "Filter" field isn't checked, that MAC address won't be blocked.
The MAC address entered here should be 12 continue alphanumeric digits without "-
" in between. Click "Apply" to save these changes.
Beacon Interval It's the signal sent periodically by wireless access point to provide
synchronization among the stations in wireless LAN.
RTS Threshold RTS packet is use to account for potential hidden stations. This
feature allows you to set the size of RTS packet.
Rev.1 - YML686
NB5580/W User Guide
www.netcomm.com.au
Page 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nb5580w

Table of Contents