Inspire M2 Assembly & Operation Manual page 12

STEP 5
2 - 4" Hex Bolts
4 - 3/8" Flat Washers
2 - 3/8" Lock Nuts
FINGER TIGHTEN ONLY
Step 5: Attach Main Upright to Main Base using:
Note: Finger Tighten Only
Step 6: Attach Guide Rods to Main Upright using:
Note: Finger Tighten Only
STEP 6
2 - 1 ¾" Hex Bolts
4 - 3/8" Flat Washers
2 - 3/8" Lock Nuts
FINGER TIGHTEN ONLY
Main Upright
Two (3/8" x 4" Hex Bolts)
Four (3/8" Flat Washers)
Two (3/8" Lock Nuts)
Two (3/8" x 1 ¾" Hex Bolts)
Four (3/8" Flat Washers)
Two (3/8" Lock Nuts)
Page 9
IMPORTANT!
Guide Rods must be
in Front of plate.