AMSTRAD E3 e-m@iler User Instructions page 95

Parental Lock
To prevent children or unauthorised users surfing the internet, you can set up a 4-digit
Parental Lock code. After setting the code, you will need to key it in each time you
enter Amsurf.
& Setting the parental lock for surfing also prevents access to any adult-
content in the SERVICES menu. The same code unlocks both Amsurf and
adult services.
Setting the Parental Lock code
➣ SETUP
FAST TRACK: Press
♦ Note, if the code is set to 0000, this means Parental Lock is off. (When you
new, the code is set to 0000.)
receive your
e-m@iler
Press SETUP, 4, 6, to receive the following
1.
display:
2. Enter the 4 digits of your code (in the small box
at the centre of the display).
♦
If you've previously set up a code, the digits
will appear as as you type them in. You
****
must enter the correct code to continue.
& If the code is incorrect, the
Once you've typed in the correct code, the small box will clear and you can then type in
a new code if required. (The new code will be displayed in full.)
& Remember – type in
0000
Press STORE, then press STOP to return to standby display.
3.
If ever you forget your Parental Lock code, there is a way to reset it to 0000).
♦
The section 'Removing all user PINs' can be found on page 163 of this book – cut
out and keep the section hidden if you don't want others to know how to remove
PINs (Personal Identity Numbers).
For information on other Amsurf settings, see page 142.
4 6
, , , enter code, press
will beep – try again.
e-m@iler
for no Parental Lock.
- 93 -
Surfing the internet
STORE
.