AMSTRAD E3 e-m@iler User Instructions page 125

Advanced settings
Replacement
e-m@iler
If you're installing a replacement , you must first adopt your old
e-m@iler e-m@iler
account as described on page 132.
After adopting your old account, carry out the previous transfer procedure using
e-m@iler
option 1 to transfer your Address Book entries.
& If you are unable to transfer the Address Book entries because the message
Hold down [EMAIL] button to restore service appears, you will need to
make an email call first (do this by holding down the EMAIL button until
Dialling for email is displayed). Wait until the email call has finished, then
retry the above procedure.
Multiple s
e-m@iler
If you have more than one at home or in the office (or both), you can use a
e-m@iler
Pocket Dock-it to circulate the Address Book, as follows:
First determine your master (containing the latest Address Book data). Plug
e-m@iler
the Pocket Dock-it into that machine and use option 9 to transfer its data to the Pocket
Dock-it. Thereafter, you can insert that Pocket Dock-it into other and use
e-m@ilers
option 1 to add the latest data to each user's existing Address Book.
IMPORTANT – When transferring data to other from your Pocket
e-m@ilers
Dock-it, make sure you do not use option 2 or 9.
& If you want to delete an Address Book entry, this has to be done on each
individually (information on page 47).
e-m@iler
EXP socket
EXP
Ignore socket on back panel for factory use only
–
- 123 -