Demo Mode; Screen Saver - AMSTRAD E3 e-m@iler User Instructions

Installation
♦
You can adjust the brightness of the display using the pull-out keyboard below
– hold down the yellow SYMBOL key while pressing
the
e-m@iler
hold down
The display is factory-set so the backlight switches off at night (if there are no
adverts to be displayed). However, if you want the backlight on continuously (or
only when the is in use), refer to Advanced settings page 124.
e-m@iler
& Don't worry that the clock setting isn't correct when you switch on – the time
(and date) will be set automatically during the registration process ahead.

Demo mode

If your is not connected to a telephone line, a demo mode will activate after a
e-m@iler
few minutes. (This is for demonstrating the
Note, the demo will automatically stop within a minute of you plugging the
a working telephone line.
To switch the demo on or off manually, press the keys "SHIFT and CALC
♦
together on the pull-out keyboard. (You may need to wait a few seconds before
the demo starts.)
& You cannot switch on the demo if any adverts are present.

Screen saver

As is the case with PC monitors, a constantly
displayed static image can 'burn' itself onto the
screen. For this reason, whenever the
hasn't been used for a few minutes, the normal
display will disappear and a screen saver will
appear instead (see example right). This moving
image helps preserve the life of the screen.
♦
Note as soon as you press a key, receive a call, pick up the handset, etc, the
screen saver will disappear and the normal display will be restored.
If you don't use the
e-m@iler
saver will appear. Note, when you resume composing, you will have to press
move the cursor back down to where you were previously typing.
while pressing
's features on in-store displays.)
e-m@iler
e-m@iler
for a few minutes while composing a message, the screen
- 10 -
or like so:
L R
or
into
e-m@iler
to
D