Email Settings - AMSTRAD E3 e-m@iler User Instructions

Cost saver notes
To check the prefix setting, press SETUP, 2, 1. The display will confirm the prefix to
be used: None, Cost Saver
(Press STORE to save any changes.)
& Not every number will be dialled with the cost saver prefix. The emergency
number 999 and most numbers starting with 1 (for example 100, 141) will be
dialled without a prefix.
& When making local calls with the cost saver, your dialling code will be dialled
automatically.
If you wish to make a call with cost saver switched off, change the setting from
(and press STORE). After making the call, you can change
Cost Saver None
to
Cost Saver
the setting back to

Email settings

The initial registration procedure sets you up as the only email user. The following
procedures show you how add or delete users.
& Note, when you delete a user, the email account for that username is
suspended (information on page 132).
Adding an email user
➣ SETUP
FAST TRACK: Press
If other people (for example, members of your family) also wish to use the
email, you can register up to 7 additional users, each of whom will have their own email
address. Each user's email is filed separately, and each user can set up a PIN
(Personal Identity Number) to prevent access to messages by unauthorised users.
To add a user, carry out the following procedure:
or PABX. You can press 1 to change the selection.
– the prefix you previously set up will be restored.
8 1
, , , follow on-screen instructions.
- 129 -
Advanced settings
for
e-m@iler