AMSTRAD E3 e-m@iler User Instructions page 17

Registration procedure
Note, if you have previously owned an
existing email address at
to use, then do not carry out this registration procedure. Instead, go to
the section entitled 'Adopting an old
If you wish to abort the registration procedure at any time, press
the STOP button on the
entered will be cleared and you can start registration again.)
Note the first time you switch on the
(after you've waited a minute for the unit to start
up), the standby display will appear (see right)
with the bottom line inviting you to:
[EMAIL] button to get
Now start registration at step 1 and follow the instructions on the screen. If you
get stuck at any point, look up the screen in question to find out what action is
required by you.
Press the EMAIL button to start registration.
1.
2. This screen gives you information on how to
use the arrow keys and ENTER to go
forwards to the next display or back to the
previous display.
Action required:
When you've read this display, make sure that
l Nextl
is highlighted (at the bottom left of the
D
screen) then press ENTER.
l Nextl
(Note if isn't highlighted, press
D
e-m@iler
@amserve.com or @amserve.net
account' on page 132.
e-m@iler
. (Note that any details you've
e-m@iler
e-m@iler
Press the
connected.
to highlight it before pressing ENTER.)
D
- 15 -
Registration
and already have an
that you wish