Setting the Parental Lock
➣
GAMES
FAST TRACK: Press
To prevent children or unauthorised users downloading games, you can set up a 4-digit
Parental Lock code. After setting the code, you will need to key it in each time you wish
to download a new game. (You won't need the code to play games, however.)
The Parental Lock must be set from the keyboard – you cannot use the GamePad.
Note, if the code is set to 0000, this means Parental Lock is off. (When you
♦
new, the code is set to 0000.)
receive your
e-m@iler
Press GAMES, 9 to receive the following
1.
display:
2.
Enter the 4 digits of your code (in the small
box at the centre of the display).
♦
If you previously set up a code, the digits will
appear as
as you type them in. You
****
must enter the correct code to continue.
& If the code is incorrect, the
Once you've typed in the correct code, the small box will clear and you can then type in
a new code if required. Remember – type in
Press STORE, then press STOP to return to standby display.
3.
If ever you forget your Parental Lock code, there is a way to reset it to 0000).
♦
The section 'Removing all user PINs' can be found on page 163 of this book.
Error messages
NO GAMES LISTED
♦
If
email call to collect the games list.
GAMES MEMORY FULL
♦
If
means that there aren't enough memory blocks available for it. Delete one of the
existing games, then try again.
CHECK CONNECTION
♦
If
has encountered a connection problem. The problem may have occurred
e-m@iler
at your end of the line, in which case it is worth checking your telephone line
connection and trying again.
9
,
, enter code, press
will beep – try again.
e-m@iler
0000
for no Parental Lock.
is displayed, your
e-m@iler
is displayed when you try to download a game, this
is displayed while trying to download a game, your
- 117 -
Games
STORE
.
has yet to make an initial