AMSTRAD E3 e-m@iler User Instructions page 66

Email
Attachments
The supports sound and graphics attachments:
e-m@iler
♦
If a received message contains a graphics attachment (for example a picture), it
will be displayed at the end of the message.
♦ If a message contains a sound attachment, the symbol
of display. Note that the sound attachment will be played automatically whenever
you open the message to read it. (If you wish to play it again, press PLAY.)
If you've added CopyMail (information on page 133), any attachments that can't be
viewed/heard on the
e-m@iler
For further information on email attachments, see Advanced settings page 141.
Checking for new email
♦ If you've selected automatic collection (information on page 53), there is no need
to check for new email – it will be collected as soon as it arrives at Amserve.
♦
If you've selected polling or manual collection (information on page 53), you can
check for new email by following the instructions 'Collecting email' on page 61.
Reading and deleting messages
➣
FAST TRACK: Press
DELETE
read (or to delete). Press
press READ and the following
1. On the
e-m@iler
display will appear:
If you've set up two or more email users,
then before you receive this display you'll be
asked to select a user.
& Tip – instead of pressing READ, you can use the keyboard to read messages.
To do this, press "SHIFT and EMAIL together to display the message list
to select a message and press ENTER to read it.
then press
U D
& Tip – once the message list is displayed, you can repeatedly press "SHIFT
and EMAIL to change the list view. You can show the
can be opened on your nominated PC instead.
READ
, press to select message, press
U D
STOP
to close message.
- 64 -
will appear at top right
ENTER
to
Size of each