Tools; Materials - Xantrex Truecharge TC20+ Owner's Manual

Tools

To mount and connect Truecharge+ you need:
p a slot screwdriver with a maximum 3/16 in wide blade for the DC
p a No. 1 Phillips screwdriver for securing the AC wiring compartment
p a wire stripper
p the manufacturer's recommended crimp tool for any crimp terminals

Materials

You need the following material:
p 3 conductor No. 14 AWG AC cable
p Appropriately sized DC cables for each battery, with suitable
p DC fuse and disconnect or circuit breaker for each battery bank
p Mounting hardware (#8 recommended), minimum 4.
p Other means to route and secure AC and DC wiring
terminals
cover
that are being used
connectors at the battery end
Preparing for Installation
2–7