Tools; Materials - Xantrex Truecharge 20+ Amp Owner's Manual

Tools

Materials

To mount and connect Truecharge+ you need:
a slot screwdriver with a maximum 3/16 in wide blade for the DC
terminals
a No. 1 Phillips screwdriver for securing the AC wiring compartment
cover
a wire stripper
the manufacturer's recommended crimp tool for any crimp terminals
that are being used
You need the following material:
3 conductor No. 14 AWG AC cable
Appropriately sized DC cables for each battery, with suitable
connectors at the battery end
DC fuse and disconnect or circuit breaker for each battery bank
Mounting hardware (#8 recommended), minimum 4.
Other means to route and secure AC and DC wiring
Preparing for Installation
2–7