Important Safety Instructions - Xantrex Truecharge TC20+ Owner's Manual

Important Safety Instructions

1. Before using the charger, read all instructions and cautionary
2. Do not expose the charger to rain, snow, spray, or bilge water. To
3. Use only attachments recommended or sold by the manufacturer.
4. The charger is designed to be permanently connected to your AC
5. To avoid a risk of fire and electric shock, make sure that existing
6. Do not operate the charger if it has received a sharp blow, been
WARNING
This chapter contains important safety and operating
instructions as prescribed by UL and CSA standards for
chargers used in residential, RV, and marine applications.
Read and keep this Owner's Guide for future reference.
markings on the charger, the batteries, and all appropriate sections
of this guide.
reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the charger in a zero-clearance
compartment. Overheating may result.
Doing otherwise may result in a risk of fire, electric shock, or injury
to persons.
and DC electrical systems. Xantrex recommends that all wiring be
done by a certified technician or electrician to ensure adherence to
the local and national electrical codes applicable in your
application.
wiring is in good condition and that wire is not undersized. Do not
operate the charger with damaged or substandard wiring.
dropped, or otherwise damaged in any way. If the unit is damaged,
see the Warranty section in
Information".
Appendix D, "Product and System
ix