Location; Circuits - Xantrex Truecharge TC20+ Owner's Manual

Truecharge 20+/40+ amp multistage battery charger
Table of Contents

Advertisement

Location

Install Truecharge+ in a location that meets the requirements set out in
Table
Table 2-1 Physical requirements for a Truecharge+ installation
Condition
Dry
Clean
Cool
Ventilated
Safe
Close to AC
junction box
Close to
batteries

Circuits

Truecharge+ is designed to operate from a 15 amp, 120 VAC (nominal)
branch circuit. The circuit must be protected by a 15 amp circuit breaker.
Any switch in the circuit should be rated for a minimum of 10 amps for
Truecharge20+ installations and 15 amps for Truecharge40+
installations. Refer to
draw.
2-1.
Description
The unit is intended for use in a dry location. Do not allow water
or other fluids to drip or splash on Truecharge+. Do not mount
the charger in an area subject to rain, spray or splashing bilge
water.
Do not expose Truecharge+ to metal filings or any other form of
conductive contamination. The presence of conductive
contamination can cause damage and void your warranty.
For best performance, the ambient air temperature should be
between 32 °F (0 °C) and 95 °F (30 °C)– the cooler the better. At
higher ambient temperatures, the output current will be
automatically reduced to protect the charger from high internal
temperatures.
Allow at least 4 inches (10 cm) of clearance around all sides of
the Truecharge+ for air flow. Ensure that the ventilation
openings on the unit are not obstructed. If mounting in a
compartment, ventilate the compartment with louvres or cut-outs
to prevent overheating.
This battery charger is Ignition Protected, so it can be installed in
areas containing gasoline tanks or fittings which usually require
Ignition Protected equipment. Xantrex recommends, however,
that it is safest not to install electrical equipment in these areas.
Avoid the use of extended wire lengths if possible.
Avoid excessive cable lengths and use the recommended wire
lengths and sizes. Undersized or overly long cables may affect
charging accuracy.
Appendix A "Specifications"
Preparing for Installation
for the actual current
2–3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Truecharge tc40+Tc20+Tc40+

Table of Contents