Caster Cart Installation - Powerware 9170 User Manual

Installation Setup

Caster Cart Installation

An optional caster cart (ASY-0527) is available for 3- and 6-slot cabinets
for increased mobility of the UPS (see Figure 7).
The caster cart, shipped separately from the UPS cabinet, must be placed
under the cabinet before installing power and battery modules, and
before plugging the UPS into the intended power outlet.
10
NOTE If the floor is uneven and the cabinet is tilted or unstable, you may need to
place a thin steel plate under a corner. Do not use the caster bolts to level the
cabinet.
7. If you are installing an external battery cabinet, continue to
"Battery Cabinet Installation" on page 17.
If you do not have an external battery cabinet, continue to "UPS
Startup" on page 49 for plug-receptacle units or to "Electrical
Installation" on page 23 for hardwired units.
NOTE The UPS cabinet is heavy. This procedure requires two people to lift and
position the cabinet onto the caster cart. Lift the cabinet using four lifting straps
shipped with the cabinet; do not attempt to lift the cabinet by the module shelves or
other convenient edges or panels.
Caster Cart
Figure 7. Three-Slot Cabinet Being Lowered onto Caster Cart
Powerware 9170 User's Guide
®
:
www.powerware.com