Rear Panel Description - Ganz DR16NRT User Manual

PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
Rear Panel
4
① Video IN / Loop : BNC Video Input Port, BNC Video Loop Output
② Monitor out : BNC Main Monitor Output
SVHS : Output Video by Connected SVHS.
③ Spot #1 ~ #4 : 4 x BNC Output to Individually-Sequenced Spot Monitors
④ Audio In : 4 x RCA Audio Line Input Terminal
⑤ Audio Out : RCA Audio Line Out Terminal
⑥ Alarm : 16 x Input TTL Alarm/Sensor Input Terminal
⑦ Relay : 16 x Relay Output Terminal
⑧ USB PORT: USB Port for use of a USB Memory Stick and/or USB HDD Backup
⑨ VGA OUT : VGA Main Monitor Output
⑩ RS-232C : Serial Configuration Port for Program Debugging
⑪ RS-485 : Serial Interface for PTZ device connection and control
⑫ RJ-45 jack : 10/100 Ethernet LAN/WAN connection (for Remote Access and Configuration)
⑬ AC Power Input
• When System Installation, Please Install under System Power Off Status.
Tip
• VGA monitor is main monitor. If you connect the CRT monitor with monitor
out, you can not see the menu.
1
5
6 7
8 9 10
9
2 3
11
12 13