38
Install Stylus Tether and Sleeve
The LXE stylus kit includes the stylus, tether and sleeves. The tether allows the stylus to be
mounted to the VX6 and the sleeve provides storage for the stylus when not in use.
How To Install Stylus Tether and Sleeves
1. Locate the tether holes on the top of the VX6. (see below):
2. Select the mounting hole most convenient for the particular VX6 installation.
3. Slide the clip end of the stylus tether into the tether mounting hole.
4. Determine a convenient location for the stylus sleeve. Apply the adhesive baked
VX6 User's Guide
Figure 33 Stylus Tether Mounting Holes
®
Velcro
loop strip to the VX6. Attach the Velcro
sleeve to the loop strip.
Figure 34 Tethered Stylus, Typical Installation
Install Mounting Brackets
®
hook strip on the elastic stylus
1
2
1
Tether Mount
3
2
Tether Cable
3
Stylus Sleeve
4
4
Stylus
E-EQ-VX6OGWW-D