36
6.
If using a UPS battery pack, the battery pack can be mounted to the bottom mounting
bracket. Place a locking washer and then a flat washer on a 1/4-20x2 bolt. Thread the
bolt through the UPS Battery Pack, then through the 1" aluminum spacer and into the
mounting bracket.
7.
Connect all cables to the VX6. Secure the cables with the strain relief cable clamps,
ensuring a slack loop remains between the cable clamp and the accessory connector.
8.
The vehicle mounted bracket and the VX6 are now ready to use.
VX6 User's Guide
Figure 31 Integrated UPS Battery Pack Mount
Install Mounting Brackets
E-EQ-VX6OGWW-D