Power Supply; Uninterruptible Power Supply Battery Pack; Backup Battery - LXE VX6 User Manual

18

Power Supply

Vehicle power input for the VX6 is 12V to 80V DC and is accepted without the need to perform
any manual adjustments within the VX6. See the section titled "Installation", sub-section titled
"Vehicle 12-80V DC Direct Connection". An optional Uninterruptible Power Supply (UPS)
battery pack is available for the vehicle power supply connection.
If 12V to 80V DC power is not available – for example, in an office environment – an optional
external Input Power Supply can be used to convert AC wall power to an appropriate DC level.
See the section titled "Installation", sub-section titled "External Power Supply".
Power input is fused for protection and the fuse is externally accessible. See section titled
"Installation", sub-section titled "Fuse Replacement for the VX6".

Uninterruptible Power Supply Battery Pack

An optional Uninterruptible Power Supply (UPS) battery pack is designed to provide power to the
VX6 for short periods of time when vehicle power is unavailable (such as when vehicle batteries
are swapped). Fully charged, the UPS battery powers the VX6 for a minimum of 15 minutes at
25º C (77º F) ambient temperature.
The Power Status LED on the VX6 indicates the UPS battery status:
Green
Solid Yellow
Flashing Yellow

Backup Battery

The internal 190 mAh Lithium backup (coin cell) battery provides power to maintain date and
time when the VX6 is not powered from an external source.
Caution
!
VX6 User's Guide
– Running on 12V – 80V power input
– Running on UPS battery, battery is not low on power
– Running on UPS battery, battery is critically low.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same type or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Power Supply
E-EQ-VX6OGWW-D