Procedure; Step 1 - Mount Bottom Mounting Bracket To Vehicle; Mounting Dimensions; Figure 27 Connect Bottom Bracket To Vehicle - LXE VX6 User Manual

Install Mounting Brackets

Procedure

Step 1 - Mount Bottom Mounting Bracket To Vehicle.

1. Position the bracket to allow access to the switches and ports on the bottom of the VX6.
2. Attach the bottom mounting bracket to the vehicle mounting surface using a minimum of
four 1/4 bolts (or equivalent) fasteners.
Note:
IMPORTANT:
After the bottom bracket has been attached to a rigid surface, you are ready to assemble the VX6
bracket configuration.

Mounting Dimensions

5
E-EQ-VX6OGWW-D
1/4 bolts and washers not included. It is recommended to use lock washers and
flat washers on the fasteners.
Mount to the most rigid surface available.

Figure 27 Connect Bottom Bracket to Vehicle

1
2
3
7
6

Figure 28 VX6 Bracket - Mounting Dimensions (Not To Scale)

1. 14.40 in / 359.2 mm
2. 12.10 in / 307.3 mm
3. 6.05 in / 153.6 mm
4
4. 1.02 in / 25.9 mm
5. 3.38 in / 85.85 mm
6. Vehicle Mount
9
Footprint
8
7. 0.406 in / 10.312 mm
8. 0.88 in / 22.3 mm
9. 1.25 in / 31.75 mm
33
VX6 User's Guide