Install Stylus Tether And Sleeve; Figure 40 Stylus Tether Mounting Holes; Figure 41 Tethered Stylus, Typical Installation - LXE VX7 User Manual

50

Install Stylus Tether and Sleeve

The LXE stylus kit includes the stylus, tether and sleeves. The tether allows the stylus to be
mounted to the VX7 and the sleeve provides storage for the stylus when not in use.
How To Install Stylus Tether and Sleeves
VX7 User's Guide
1. Locate the tether holes on the top of the VX7. (see below):

Figure 40 Stylus Tether Mounting Holes

2. Select the mounting hole most convenient for the particular VX7 installation.
3. Slide the clip end of the stylus tether into the tether mounting hole.
4. Determine a convenient location for the stylus sleeve. Apply the adhesive baked
®
Velcro loop strip to the VX7 or mounting bracket. Attach the Velcro
on the elastic stylus sleeve to the loop strip.

Figure 41 Tethered Stylus, Typical Installation

1
2
3
4
Install Mounting Brackets
®
hook strip
1 Tether Mount
2 Tether Cable
3 Stylus Sleeve
4 Stylus
E-EQ-VX7OGWW-H