Speaker Assembly - HP EliteBook 9470m Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive cover (see
b. Hard drive (see
c. Service cover (see
d. Keyboard (see
e. Base enclosure (see
f. Fan (see
g. System board (see
Remove the speaker assembly:
1. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each speaker to the computer.
74 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive cover on page
Hard drive/SSD drive on page
Service cover on page
Keyboard on page
Base enclosure on page
Fan on page 68)
System board on page
41), and then remove the following components:
47)
48)
53)
60)
63)
69)
Spare part number
702869-001