Base Enclosure - HP EliteBook 9470m Maintenance And Service Manual

Base enclosure

Description
Base enclosure
Before removing the base enclosure, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive cover (see
b. Hard drive (see
c. Service cover (see
d.
Keyboard (see
Remove the base enclosure:
1.
Close the computer and position it upside down.
2. Remove the WLAN (1) and WWAN (2) antennas from the routing path (3) in the base enclosure.
Battery on page 41), and then remove the following components:
Hard drive cover on page
Hard drive/SSD drive on page
Service cover on page
Keyboard on page 60)
47)
48)
53)
Component replacement procedures
Spare part number
702863-001
63