Hard Drive/Ssd Drive - HP EliteBook 9470m Maintenance And Service Manual

Hard drive/SSD drive

NOTE:
The hard drive spare part kit does not include the hard drive bracket, connector, or screws.
The solid-state drive spare part kit includes the Hard Drive Hardware Kit, which includes the bracket,
connector, and screws..
Description
Hard drive (does not include hard drive bracket or screws):
500-GB, 7200-rpm, 7-mm SED
500-GB, 7200-rpm, 7-mm
320-GB, 7200-rpm, 9.5-mm
Solid-state drive (includes bracket, connector, and screws):
256-GB, SATA III, self-encrypting drive (SED)
180-GB, SATA III
mSATA SSD:
256-GB mSATA
32-GB mSATA
24-GB mSATA
Hard Drive Hardware Kit (includes hard drive bracket, connector, and screws)
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the hard drive cover (see
Remove the hard drive:
1. Loosen the 4 captive hard drive screws (1) that secure the drive to the computer.
2. Pull the hard drive tab (2) upward to disconnect the hard drive.
48 Chapter 4 Removal and replacement procedures
Battery on page 41).
Hard drive cover on page
Spare part number
703268-001
703267-001
603783-001
702865-001
702864-001
702866-001
702867-001
702868-001
702870-001
47).