Area Display Mode Setting (Direction) - JVC TK-C685E Instructions Manual

Detailed setting
Area Display Mode Setting
(Direction)
When the basic axis direction N (north) is set, this function
divides the 360 panning (horizontal rotation) area into 8
areas and displays N, NE, E, SE, S, SW, W, NW respectively
for each area when the camera is panned (rotated
horizontally) manually.
S E
East
N
[MENU] button
[SET] button
[ENTER] button
Preparation
1
Select a camera (A RM-P2580 Instruction Manual)
● [CAMERA] button B Numeric keypad (camera number)
B [ENTER] button
● Images from the selected camera are output.
2
Display the [MENU] screen (A Page 34)
● The [MENU] screen is displayed.
3
Select the [CAMERA TITLE/ALARM] screen
● Shift up and down the [PAN/TILT] lever, move the
cursor ( ) to the [CAMERA TITLE/ALARM] item and
press the [SET] button.
● The [CAMERA TITLE/ALARM] screen is displayed.
West
W
N W
Numeric keypad
[CAMERA] button
[PAN/TILT] Lever
MENU
LANGUAGE ENGLISH
CAMERA FUNCTION1..
CAMERA FUNCTION2..
CAMERA TITLE/ALARM..
CAMERA ALC..
CAMERA VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
< > < >
MENU EXIT SET SUB MENU
[MENU] screen
Setting
1
Move the cursor ( ) to [AREA DISPLAY], shift the
[PAN/TILT] lever to the left and right to select DIR ,
and press the [SET] button
● The [DIRECTION STANDART AXIS] screen is
displayed.
CAMERA TITLE / ALARM
CAM.TITLE EDIT..
AREA DISPLAY.. DIR
ALM. TITLE SIZE DOUBLE
ALM. TITLE COLOUR WHITE
ALARM TITLE EDIT..
ALARM INPUT..
ALARM OUTPUT..
< > < >
MENU RETURN SET SUB MENU
[CAMERA TITLE/ALARM] screen
DIRECTION STANDARD AXIS
SET UP STANDARD AXIS(N)
<MENU>RETURN
[DIRECTION STANDART AXIS] screen
2
Shift the [PAN/TILT] lever to the left and right
and set the basic axis direction (N)
3
Press the [MENU] button
● The directional axis start position is set and the
direction is displayed on the top left of the screen.
● The direction is displayed respectively as N (north), NE
(northeast), E (east), SE (southeast), S (south), SW
(southwest), W (west) and NW (northwest).
Memo :
● Tilt, zoom and focus operations are available when this
menu is displayed.
● When the directional axis start position is already set and
this menu is activated, the camera will move to the
configured directional axis start position.