Auto Pan/Patrol/Trace Screen - JVC TK-C685E Instructions Manual

AUTO PAN/PATROL/TRACE
screen
This screen sets the Auto Pan function that rotates slowly in a horizontal direction, the Auto Patrol function that moves the camera
to multiple positions in sequence, and the Auto Trace function that reproduces manual camera settings.
(● indicates the default value)
Item
AUTO PAN SET..
AUTO PAN MODE
AUTO PAN SPEED
A.PAN POS.SET..
AUTO PATROL SET..
Mode
Position
PATROL1
PATROL2 to
PATROL100
Time
AUTO TRACE SET..
Setting value
^
This item sets the Auto Pan operation.
[Auto Pan setting] (A Page 66)
● RETURN
RETURN:Shuttles to and from the start and end positions
RIGHT
RIGHT
LEFT
LEFT
LOW This item sets the rotation speed during Auto Pan.
● NORMAL
LOW
HIGH
NORMAL : Normal rotation
HIGH
^
This item sets the start and end positions for Auto Pan during the to-and-fro
shuttle.
^
This item sets the Auto Patrol operation.
[Auto Patrol Setting] (A Page 68)
● 1
Select the pattern of the Auto Patrol operation mode.
2
3
This item sets the order of the patrolling positions.
● HOME
The camera will auto-patrol in the order of the set positions.
POS1 to POS99
Memo :
● When using Pelco protocol, patrol number item is PATROL1 to PATROL80
HOME
● POS1 to POS99
and the setting value is changed to POS1 to POS32, POS35 to POS82,
POS100 to POS256 .
SKIP This item sets the duration the camera remains at one position.
● 10s
20s
30s
45s
1min
2min
^
This item sets the Auto Trace operation.
[Auto Trace Setting] (A Page 70)
Functions and settings
: Right rotation
: Left rotation
: Low speed rotation
: High speed rotation