Camera Video Screen - JVC TK-C685E Instructions Manual

Changing camera settings from remote control

CAMERA VIDEO screen

(● indicates the default value)
Item
● CRT
MONITOR TYPE
LCD1
LCD2
● OFF
DVR SAVE MODE
ON
COLOUR LEVEL –5 to NORMAL to 5
(● NORMAL)
ENHANCE LEVEL –5 to NORMAL to 5
(● NORMAL)
SETUP OFF
● ON
● OFF
DNR MODE
ON
● OFF
SEC MODE
ON
Setting value
This sets the monitor type.
You can change the output video settings according to the type of monitor used.
Select an appropriate mode.
Select this to record images to an external hard disk recorder. When ON is set,
you can reduce the amount of recording data but the resolution will deteriorate.
This item adjusts the color level of the video signals.
To lighten the colorBDecrease the number
To darken the colorBIncrease the number
This item adjusts the contour correction that emphasizes the vividness on the
monitor screen.
To soften the image qualityBDecrease the number
To sharpen the image qualityBIncrease the number
Memo :
● When [DVR SAVE MODE] item is set to ON , - - - will be displayed and
settings is disabled.
This item adjusts the pedestal level (black standard) of the video signals.
OFF : To reduce the brightness of the image.
ON : To increase the brightness of the image.
Memo :
● When [MONITOR TYPE] item is set to LCD1 or LCD2 , - - - will be
displayed and settings is disabled.
This item sets the DNR (Digital Noise Reduction) function.
When ON is set, image noise on the screen will be reduced.
Memo :
● Image noise in dark images will be reduced but the resolution will deteriorate.
● The edges of adjacent areas with high and low illumination may appear rough.
When set to ON , this item emphasizes images with very fine and detailed
parts. This will increase the visual resolution of the image.
Memo :
● When [DVR SAVE MODE] item is set to ON , - - - will be displayed and
settings is disabled.
● Some objects may cause the image noise to be significant.
Functions and settings