Changing Camera Settings From Remote Control; Setting Procedures - JVC TK-C685E Instructions Manual

Changing camera settings from remote control

Setting Procedures

You can call out the camera menu and set functions from the
remote control for systems that use the remote control unit.
Memo :
● The onscreen displays used in this manual are basically
from TK-C686E/TK-C686WPE except in special cases.
Setting camera menu from RM-P2580
Memo :
● Do not operate the RM-P2580 menu until the camera has
completed initialization.
● Refer to the RM-P2580 Instruction Manual together with
this manual.
● Menus described in this item are color menus. Camera
menus are indicated in yellow, and remote control menus
are indicated in white. For the RM-P2580 system menu,
refer to the RM-P2580 Instruction Manual.
[MENU] button
[SET] button
[POWER] lamp
1
Turn ON the power switch at the rear
The [POWER] lamp lights up.
2
Press the [MENU] button for 3 seconds.
● The [MENU] button lamp lights up.
● The [SETUP] screen at the remote control is displayed
from [MONITOR OUTPUT-1].
3
Shift down the [PAN/TILT] lever and move the
cursor ( ) to the [CAMERA..] item.
● When the lever is pressed upwards ( ), the cursor
moves up.
● When the lever is pressed downwards ( ), the cursor
moves down.
Power switch (rear)
[PAN/TILT] Lever
Cursor
SETUP
POSITION SETUP. .
CAMERA. .
CONTROL UNIT. .
[SETUP] screen
MENU
LANGUAGE ENGLISH
CAMERA FUNCTION1..
CAMERA FUNCTION2..
CAMERA TITLE/ALARM..
CAMERA ALC..
CAMERA VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
< >
MENU EXIT
[MENU] screen
4
Press the [SET] button
● The item and screen are displayed.
● Items with .. at the end indicate they have submenus.
5
Shift the [PAN/TILT] lever up and down to select
items
6
Press the [SET] button
● Press the lever to the left ( ) to minimize the numbers.
● Press the lever to the right ( ) to maximize the
numbers.
Change mark
CAMERA FUNCTION1
V. PHASE
POS. TITLE LOC.
PRIVATE MASK..
MANUAL DISPLAY
HOME M. DETECT
D.ZOOM MAX
STABILIZER
< >
MENU RETURN
Example of submenu screen
Memo :
● A change mark ( ) as shown in the left diagram will be
displayed when the item setting is changed.
7
Press the [MENU] button
When the item has been set, press the [MENU] button to
return to the top menu screen.
Contains
submenu
1
UP-L
ON
OFF
X2
OFF