Priority Channel Setting; Priority Scanning ( P-Scan ) - Standard Horizon Eclipse GX1300 Owner's Manual

8.7.4 Priority Channel Setting

In the default setting, Channel 16 is set as the priority channel. You may
change the priority channel to another channel from Channel 16 via the
SETUP menu.
1. Press the MENU key to display the menu.
2. Select " SETUP " with the ▲ / ▼ / ◄ / ► keys,
then press the
3. Press the ▲ / ▼key to select " C H A N N E L
SETUP ", then press the
4. Press the ▲ / ▼ key to select " PRIORITY CH ",
then press the
5. Press the ▲ / ▼ keys to select the priority
channel.
ENTER
6. Press the
setting.
BACK
7. Press the
Priority Channel can be set for each Chan-
nel Group.

8.7.5 Priority Scanning ( P-SCAN )

1. Adjust the SQL knob until background noise disappears.
2. Select " PRIORITY SCAN " as scan type via the SETUP menu.
3. Press one of the soft keys, then press the
SCAN
soft key (it may be necessary to press
the ◄ / ► key to locate the
" P-SCN " appears on the LCD. Scanning will
proceed between the memorized channels and
the priority channel. The priority channel will
be scanned after each programmed channel.
4. Scanning will stop on a channel when a trans-
mission is received. The channel number will
blink during reception.
5. To stop scanning, press the 16/S key or press one of the soft keys, then
SCAN
press the
Page 30
SELECT
soft key.
SELECT
SELECT
soft key.
soft key to store the selected
soft key to exit the menu.
NOTE
SCAN
soft key.
soft key.
soft key).
BACK SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
CHANNEL SETUP
SCAN TYPE
SCAN RESUME
PRIORITY CH
SUB CH
BACK SELECT
PRIORITY CH
CH: 16 P-CH
CH: 17
CH: 18A
CH: 19A
BACK ENTER
16
BUSY
25W
P
USA
P-SCN
GX1300
MEM
A
C