International Modem Restrictions; Emc, Safety, And R&Tte Directive Compliance; New Zealand Telecom Warning Notice - Multitech MultiModem MT5600ZDX User Manual

International Modem Restrictions

Some dialing and answering defaults and restrictions may vary for international
modems. Changing settings may cause a modem to become non-compliant with
national telecom requirements in specific countries. Also note that some software
packages may have features or lack restrictions that may cause the modem to
become non-compliant.
EMC, Safety, and R&TTE Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following
European Community Directives:
• Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws
• Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the
• Council Directive 1999/5/EC of 9 March on radio equipment and

New Zealand Telecom Warning Notice

1. The grant of a Telepermit for any item of terminal equipment indicates only that
2. Immediately disconnect this equipment should it become physically damaged,
3. This modem shall not be used in any manner which could constitute a nuisance
4. This device is equipped with pulse dialing, while the Telecom standard is DTMF
of Member States relating to electromagnetic compatibility;
and
laws of Member States relating to electrical equipment designed for use within
certain voltage limits;
and
telecommunications terminal equipment and the mutual recognition of their
conformity.
Telecom has accepted that the item complies with minimum conditions for
connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that
any product is compatible with all of Telecom's network services.
This equipment is not capable under all operating conditions of correct
operation at the higher speed which it is designated. 33.6 kbps and 56 kbps
connections are likely to be restricted to lower bit rates when connected to some
PSTN implementations. Telecom will accept no responsibility should difficulties
arise in such circumstances.
and arrange for its disposal or repair.
to other Telecom customers.
tone dialing. There is no guarantee that Telecom lines will always continue to
support pulse dialing.
A Regulatory Compliance
59