Installing Dial-Up Networking In Windows 2000 - Multitech MultiModem MT5600ZDX User Manual

Installing Dial-Up Networking in Windows 2000

Dial-Up Networking installs automatically in Windows 2000. The following
instructions describe Dial-Up Networking connection options under Windows 2000,
and guide you in setting up a Dial-Up Networking connection to an Internet service
provider (ISP).
Note: Make sure TCP/IP is installed on your computer.
1. To set up a Dial-Up Networking connection in Windows 2000, select Start |
2. In the Network and Dial-up Connections dialog box, double-click the Make
3. In the Network Connection Type dialog box, select Dial-up to the Internet.
4. In the Internet Connection Wizard dialog box, select the appropriate option for
5. In the Setting up your Internet connection dialog box, select I want to connect
6. If you have only one modem installed on your computer, proceed to the next
7. In the Step 1 of 3: Internet account connection information dialog box, type the
8. Click the Advanced tab to access options for selecting your connection type and
9. In the Step 2 of 3: Internet account logon information dialog box, type the user
10. In the Step 3 of 3: Configuring your computer dialog box, enter a descriptive
11. Next, you are asked if you would like to set up an Internet mail account. You
Settings | Network and Dial-up Connections.
New Connection icon. The Network Connection Wizard dialog box appears.
Click Next.
Click Next. The Internet Connection Wizard dialog box appears.
the type of connection you are making to the Internet. Click Next. The rest of
this procedure assumes you selected I want to set up my Internet connection
manually, or I want to connect through a local area network
through a phone line and modem. Click Next.
step. If you have more than one modem installed, select your Multi-Tech
modem from the list. Click Next.
area code, telephone number, and country/region name and code for your
Internet service provider's access number.
logon procedures. Your ISP should provide this information to you. If you are
not sure which connection type to choose, try PPP.
Though many ISPs automatically provide an IP address for your machine and
their domain name server (DNS) each time you connect to them, some ISPs do
not. If your ISP-provided IP addresses to you, click the Addresses tab. In the IP
Address section, select Always use the following, and then enter the IP
addresses into the appropriate boxes. Click OK to return to Step 1 of 3: Internet
account connection. Click Next.
Note: If your machine has a network adapter installed, do not enter the network
IP address of this device.
name and password you will use for your Internet account. Click Next.
name for this connection. Click Next.
may select Yes or No. If you select Yes, you will be asked to provide specific
information about your mail service. Click Next.
2 Installation
13